What to do if, after washing the down jacket, the fluff has strayed into lumps

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

Often, mistakes in washing and drying a down jacket cause lumps to appear. What to do in such a situation if the fluff after the washing machine has strayed into lumps, because the appearance of the product deteriorates, it also becomes impossible to use it in the future.

Shaking the garment, fluffing it up, or softening the pressed areas can help remove any lumps that have formed. There are several ways to help you cope with such a nuisance.

Manual impact on clothing

The surface of down jackets, thanks to dense stitching, is divided into several segments with a filling. If lumps have formed, each compartment must be sorted out with your hands and rubbed so that the filler fluffs up. The product must be constantly shaken, waiting for the fluff to be evenly distributed throughout the compartment. At the end, the down jacket should be shaken again and straightened.

If you beat the garments vigorously for five minutes, as you do with pillows, the dried fluff can be straightened out.

Using a vacuum cleaner

The next option, which will tell you what to do if the down has gotten into lumps after washing a winter or autumn down jacket, is to use a vacuum cleaner. This method is especially suitable if there are a lot of lumps, and the filler is strongly collected.

Interesting! All about how to properly wash things in the washing machine

The product must be rolled up and then put into a vacuum plastic bag, from which the air must be sucked out with a vacuum cleaner. The next step is to activate the inflation function so that the bag is filled with air.

Such actions must be done several times until the filler of the down jacket completely acquires its original appearance. When this is achieved, the thing needs to be shaken and whipped.

In the washing machine with balls

If the down filling of the jacket has turned into lumps, you can use the spin mode in the washing machine, but with the addition of tennis balls, which will help to straighten the matted down, despite the fact that the jacket is already dry.

This method implies a clear implementation of the following steps:

1. Set the spin mode with a maximum speed of 400 rpm.
2. Put a dry down jacket in the drum of the washing machine, add 3-4 tennis balls to it.
3. Turn on spin. If the fluff is crumpled very tightly, this procedure should be carried out more than once, especially if the program is short-lived.
4. When the time is up, the down jacket should be taken out of the washing machine, then shaken well on all sides so that the filler is well distributed over the segments of the product.
5. Beat the down jacket as you do with pillows.

The main thing is that you need to break and distribute the filler in the down jacket only when the thing is dry. Wet fluff cannot be straightened out.

With a hair dryer

What else can you do if the fluff has strayed into lumps when washing a down jacket. In this case, you can also use a hair dryer to help fluff up and smooth the filler. Use this device only when the item has remained slightly damp.

Interesting!

To do this, the down jacket should be turned inside out, hung on a hanger and dried on the back side. It is important to direct the air upward. This will dry the jacket without lumping.

High-quality drying with a hair dryer should be done in cold or slightly warm air mode. When exposed to hot air, the filler will become brittle. You need to dry it periodically, stopping after a while and whipping the fluff in different directions. Such actions will help to distribute the filler as efficiently as possible and break the lumps even before they dry out.

Using a carpet beater

To fix caked fluff, the product must be knocked out well. This is done with the help of physical force or knocked out for carpets. It is important to monitor the applied force so as not to damage the surface of the down jacket.

This method involves the following steps:

1. Lay out the thing on a soft horizontal surface, you can use a bed or sofa.
2. Then gently pat the surface of the jacket with a carpet beater. If everything is done correctly, the formed lumps will break, and the filler will evenly fill the segments of the product.
3. The result should be secured by repeatedly shaking the jacket in different directions.

Interesting! Is it possible to wash a sheepskin coat in a washing machine

If you can't find a carpet beater, you can use a small stick or kitchen spatula. The movements should be light and patted so that the filler does not come out.

Exposure to temperature

Answering the question of what to do if, after washing the down jacket, the down has strayed into lumps, one more method should be mentioned - the effect of temperature on the spoiled thing. In winter, when the jacket is completely dry, it should be placed in a room with a low air temperature, preferably in frost. After that, the product should be brought back to a warm room so that it warms up.

After 3-4 hours, these steps must be repeated. At each change of premises, the down jacket should be whipped, shaken and spread with your hands. Thus, you need to do a few rounds.

Due to the change in temperature, the collected filler can be softened and fluffed. At the end, the down jacket needs to be kneaded with your hands and shaken.

What to do to prevent the fluff from gathering into lumps

To avoid the formation of crumpled filler, you should follow the tips:

• it is important to wash at a temperature of + 30 ° С - no more;
• use a delicate liquid detergent;
• set a delicate wash mode on the machine;
• use an average spin mode - up to 600 rpm;
• turn on the additional rinse mode;
• rinse with conditioner to soften the fabric and quickly straighten the fluff;
• hang the product on a hanger or lay it out on a dryer;
• it is necessary to dry the jacket only in natural conditions, shake and straighten it periodically.

Summarize

Summarizing the above, several conclusions can be drawn:

1. If you do not follow the rules of washing and drying the down jacket, the filler can collect in lumps. This can be avoided by washing in lukewarm water and not using the powerful spin cycle.
2. You need to dry the product in a natural way, periodically patting and straightening the filler.
3. If, nevertheless, the fluff has fallen off, there are several ways that will help to correct the unsuccessful appearance of the product: manual action, washing with tennis balls, using a carpet beater, hair dryer, vacuum cleaner, or the effect of contrasting temperature.