Learning to tie a tie beautifully: a step by step photo

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

In the modern world, any man can choose a business suit and feel confident in any situation. But to make the image look complete, you should know how to tie a tie in a simple way. Step by step photos will help you figure this out.

A simple knot for beginners

In order to tie a tie, it is enough to know a few tricks. It is enough to practice a little in front of a mirror, and a positive result is guaranteed.

Here's where to start:

1. Place the tie so that the wide end is in the left hand and the narrow end is on the right side.
2. We overlap most of it over the thin one and wrap it in a circle. Make sure that the tip is on the bottom near the right hand. In this case, you do not need to pull the fabric too tight.
3. We throw the wide end over the top and thread it into the resulting loop (or rim). It remains only to bring it out from the left side and form a simple knot.

Double Windsor

The next option for a fashionable look involves repeating simple steps:

1. Throw the tie around the neck with a seam inward. In this case, the thin end should be on the left side, and the wide one on the right.
2. We pass the large tip through the loop so that it is on top, and gently pull it in front.
3. Then we pull the tie down and take it to the right. We stretch in such a way that the narrow part is near the shirt, and the wide one looks out. This must be done with a loop, winding it back.
4. On top of the resulting knot, we draw a wide part of the tie and pull it out from the right side.

You can also get the large tip through the loop on top. It is through the formed gap that we stretch the wide part, but very carefully, in order to get an elegant knot.

Interesting material: Men's fashion autumn-winter 2018-2019: explosive trends

Double knot

Another easy way to tie a tie, focusing on step by step photos:

1. Throw in a tie with a seam inward. We cross the two sides so that the wider part looks to the right. After that, we wrap the narrow end with it, keeping the loop intact. If done correctly, the large tip will be near the left hand.
2. We slowly tighten the tie, but make sure that the narrow part is on top, and the wide one "goes" towards the right hand, forming a loop.
3. We put a wide knot on top of it, and turn to the left, passing through the gap in the neck area.
4. We stretch the large side of the accessory into the eyelet and carefully tie it. Be sure to straighten the tie with your hands - this will help emphasize the double knot.

Quarter knot

An interesting idea for those who are fed up with the "everyday" version of the site. It is not so difficult to repeat it if you follow all the recommendations:

1. We put the tie around the neck so that the seam looks inward. The thin part should be on top and the wide tip extends from the right side.
2. After that, we take the wide part to the left hand and pass it through the loop formed on the neck. At the same time, we pull the tie to the top. All this time we hold the knot so as not to tighten it too much.
3. It remains only to tie the business accessory so that the wide side is closer to the shirt collar, and the narrow part can be pulled down a little.

Interesting: The most fashionable men's haircuts 2018

Diagonal knot

The next easy way to tie a tie can be seen in step by step photos. It is also recommended to read additional instructions:

1. We put a tie around the neck so that its seam looks inward. After that we put a wide part on top and form a crosshair.
2. Now we stretch the wide tip from below, take it closer to the right hand and wrap it around the narrow part once. As a result, the thin part should be on the right.
3. We stretch the larger side through the front side of the knot, while throwing it through the loop on the neck. You need to bring it closer to the left hand.
4. It remains only to thread the tip into the formed eyelet, and carefully tighten the tie.

Cross knot

This option looks very elegant and emphasizes the good taste of a man. It takes a little practice to tie the knot, but the effort is worth the effort.

Just a few steps need to be repeated:

1. We put the tie with a seam inside. We cover the wide side of the accessory with a thin part, after which we take it closer to the right hand.
2. We put the narrow side under the wide one so that a loop forms.
3. We bring the larger end to the top, wrap it through the other side and tighten it gently.

Hanover

A symmetrical knot will help create an interesting look and diversify a business suit. Step-by-step instructions will help you do everything in the best possible way:

1. Throw in the tie with the seam outward. After, it must be crossed so that the seam of the wide part is also on the outside.
2. We cover it with a thin side and make sure that it stretches closer to the right hand.
3. We start most of it at the smaller end and direct it to the right. We start the loop from the bottom up and stretch the wide part down, and then to the left.
4. We make one circle near the knot, then carefully draw the large tip through the upper loop near the neck.
5. If done correctly, the wide side will bend around the base of the tie from left to right. Now we start it from the back on the loop near the neck so that it falls into the knot.

Kelvin Knot

Tying a tie in this way is very easy. In just a few minutes, you can add a twist to your casual look or change your holiday outfit a bit.

This requires:

1. We put on a tie so that the seam is on the outside.
2. We direct the thin part to the right hand so that it is on top. In this case, the seam should not change its position.
3. Now place the wide part on top, completing a full circle. At the end, this side should be closer to the left hand.
4. On top of the knot we put a large part of the tie one more time, but we "lead" the fabric from left to right. Then we pass the end through the loop and through the formed eyelet.

Oriental

The easiest way to tie a tie and is great for beginners. How to achieve a positive result will be prompted by step-by-step photos and additional instructions:

1. We throw a tie around the neck and cross its sides so that the thin side is on top, and looks to the right side.
2. We wrap the smaller part with the wide side once and make sure that it is closer to the left hand.
3. We stretch the large tip into a loop, pull it gently down and get a neat knot.

Onassis knot

In order to tie a tie in this way, you must repeat the following steps:

1. We put on the men's accessory around the neck so that its seam looks down. We put the wide part on the narrower side. It should be closer to the left hand.
2. We put the larger tip under the thin side, and then direct it up and stretch it through the formed loop on the neck.
3. As soon as the ear appears, pull the same side down, tie a knot and give it a sharper outline.
4. At the end, we take the wide part closer to the right hand, transferring it to the resulting knot for this. Straightening the tie again.

As you can see, there are several easy ways to tie a tie. For convenience, you can use step-by-step photos or instructions with detailed videos.