How to quickly wash a gas stove from grease at home

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

Many housewives do not know how to clean the gas stove from grease at home. Kitchen appliances always get dirty very quickly. It is quite difficult to wash it from fat. Therefore, it is necessary to figure out what means can be used to efficiently remove fat and carbon deposits.

Choice of funds

Not knowing how to clean the gas stove from grease at home, women go to the store for household chemicals. The latter do not always cope with pollution. In addition, well-deserved concerns are associated with an unsafe composition. Store-bought products are quite expensive. Sometimes there is a need to urgently wash the stove, but there is nothing suitable at hand. In this case, you can use folk methods.

If you do not know how to clean the gas stove from grease at home, try using those substances and products that are in the house: ammonia, mustard powder, vinegar, citric acid, laundry soap, etc.

Interesting! How to clean grease from kitchen furniture at home

Effective ways

How to clean a gas stove from grease and carbon deposits at home? We suggest using the most effective methods:

1. Soda is an indispensable tool in the kitchen for any housewife. This powder is available in every apartment. It can be used to quickly clean the stove. To do this, moisten its surface with water and remove food residues. Apply soda to the stove with a thin layer. The product must remain on the surface for at least an hour. After that, it can be removed along with the remaining fat with napkins or a sponge. In an hour, the pollution will have time to turn sour, so it will be easy to get rid of them. After that, you can wipe the surface with a solution of water and ammonia prepared in a 1: 1 ratio.
2. Laundry soap can be safely called a universal and multifunctional household product. It can be used to wash off greasy dirt. To prepare a detergent based on it, you will need a whole bar of soap, which must be grinded on a coarse grater. A little water must be added to the shavings to get a creamy mass. The solution is applied to a damp surface. After 15 minutes, the product with residual dirt can be removed with a damp sponge.
3. Citric acid allows you to quickly get rid of old fat. The powder is spread in an even layer on the damp surface of the plate. After a quarter of an hour, the dissolved residues of dirt must be removed with a clean cloth.
4. Removes grease stains and acetic acid in the same way. It is poured over dried greasy spots and burnt food residues. The acid takes 20 minutes to dissolve the impurities. After the stove is washed out with a sponge dipped in warm water.
5. A mixture of vinegar and soda does an excellent job. The powder is spread over the surface of the stove, and vinegar is poured on top. Substances react to break down fatty deposits. After its completion, the stove can be rinsed with clean water.
6. Lemon juice washes away greasy deposits well. They rub the surface with it and leave the product for an hour. And then the remnants of dirt are washed off with warm water.
7. To remove greasy carbon deposits, a mixture made from salt and soda with the addition of water is used. The mass should have a sour cream consistency. Please note that the salt must be finely ground.
8. Common glue dissolves old dirt well. It should be mixed with laundry detergent and baking soda. The mass is distributed over the hob. After about 40 minutes, the stove must be washed from the residues of the product and grease using warm water.

We bring to your attention a video on how to wash a gas stove from grease at home.

How to wash the grates

Dealing with dirt on the hob is much easier than cleaning the grates. It is they who give the hostesses a lot of trouble. We offer the most effective ways:

1. To combat carbon deposits and fat, ammonia is used. For this, the entire grate is lubricated with a sponge with ammonia. And then apply any dish detergent.
2. Mustard powder copes well with carbon deposits. They rub the entire surface of the lattice with it. The caustic substance dissolves fat qualitatively. After 15 minutes, the metal surface is brushed, and then the remaining dirt is removed with a sponge.
3. A gruel made from a mixture of vinegar and soda is suitable for cleaning the grates. It is evenly applied to contaminated areas. After 30 minutes, the surface is brushed and then thoroughly rinsed.
4. If you have time to clean the grate properly, use fine sand. It should be slightly heated and then spread over the entire surface. The substance absorbs any fat well. The most difficult areas can be wiped with a wire brush.
5. A solution made from vinegar, soda and water removes grease and carbon deposits well. Pour hot water into a large basin. Then add 2 tablespoons of vinegar and soda to it. The grates must be placed in the solution for several hours. After processing, they can still be rubbed with a hard sponge.
6. Boiling is considered the easiest and most effective way to remove dirt, but it is not often used due to its inconvenience. To process the grates, you will need a spacious container. And not every housewife has it. 5-6 liters of water are poured into a saucepan, shavings of laundry soap, 3 tablespoons of soda and a crushed apple are poured. Such a composition may seem strange. However, soap and baking soda are great for cleaning metal, and malic acid will give it a shine. The boiling time is determined by the degree of soiling.

After cleaning, the wire shelf should be thoroughly dried, as fat adheres to a damp surface much faster.