How to quickly wash rust in the toilet

2024 Author: James Gerald | [email protected]. Last modified: 2024-01-12 17:37

Every housewife is obliged to know how to wash rust in the toilet at home and what cleaning products should be at hand. It will not be possible to cope with the problem forever. Both the quality of the water and the condition of the pipes in the houses of the old buildings are to blame for this. The serviceability of the toilet itself, or rather the cistern, also plays an important role. Therefore, it is imperative to keep the toilet clean.

Preparatory stage

In household chemical stores, there are enough all kinds of gels to fight rust, but folk remedies have a lot of advantages over them. They clean the toilet bowl enamel more gently and are less harmful than any "homestas".

You can eliminate unwanted plaque with soda, Coca-Cola, ammonia and other improvised means. But before you learn how to wash rust in the toilet at home, let's prepare everything you need for the procedure:

1. You will need a basin or other container in which the cleaning solution will be prepared, as well as heavy rubber household gloves.
2. Protect your clothing and wear a special apron. You can take a respirator if you plan to use something from aggressive chemicals.
3. Do not forget to open wide the windows and the toilet door, turn on the hood (if any). The home must be well ventilated.

Choosing an effective remedy

Experienced housewives know several effective ways to combat rust at once. If you believe the reviews, phosphoric acid, vinegar and peroxide with ammonia help to cope with the problem better and faster than other means. Let's consider each of them in more detail:

1. Orthophosphoric acid. Tops the top of the best anti-rust agents, but requires caution. Sold in hardware stores as an 85% solution. The solution is prepared as follows: take 100 ml of acid for half a liter of water and mix thoroughly. The toilet is pre-washed with soapy water and only after that they start cleaning with acid. The solution is applied to the places of contamination and left for several hours (it may take up to 12 hours if the rust is old). At the end, you should prepare another solution, soda, (a tablespoon of soda per liter of water) and rinse the toilet with it.
2. Vinegar. Among the methods for removing rust, acetic acid is also in the lead. For the procedure, you will need 250 ml of 9% vinegar, which must be slightly heated in a water bath to 50 degrees. Then pour the vinegar into the toilet and add a couple of teaspoons of baking soda to it. When doing this, close the toilet lid. It is good to do the procedure at night, or do not use the toilet for at least 2 - 3 hours while the reaction is going on. At the end, you need to thoroughly rinse it with water using a brush.
3. Hydrogen peroxide with ammonia. Here's what else you can wash rust in the toilet at home - peroxide with ammonia. The solution can be prepared in a half-liter glass jar with a lid. For 100 ml of alcohol, you need to take 50 ml of peroxide, and you need to add it to the ammonia, and not vice versa, gently pouring in the liquid in a thin stream. Then the jar should be tightly closed with a lid and shaken well. Apply the resulting solution to a cloth, treat the contaminated surface with it and leave for half an hour. After this time, the toilet should be rinsed with water.

These are the means by which you can remove rust, and they are far from the only ones. Many housewives use other methods with success. We will talk about them further.

Important! When studying how to wash rust in the toilet at home, what tools are better to use, do not forget about the cistern. If you ignore the cleaning of the cistern, red spots will very quickly appear on the toilet. Turn off the water before cleaning it, and then use one of the above methods to deal with rust.

Interesting! How to quickly remove yellow stains from your bathroom

Whiteness, soda, citric acid

Whiteness is also a good way to deal with rust stains. Before the procedure, it is advisable to drain the water from the tank. Pour the whiteness into the toilet and leave for several hours. Ideally, for the whole night. At the end of the procedure, thoroughly clean the rust stains with a brush or stiff brush.

Now about how to clean rust in the toilet at home with baking soda. It is effective both in tandem with vinegar and soda ash (1: 1 ratio). The soda mixture is poured into the toilet at night, and in the morning the plaque is cleaned with a brush.

How else to wash the rust in the toilet at home with folk remedies? Citric acid, of course. The principle is the same as when using baking soda. A couple of bags of citric acid should be poured into the toilet, at the places of pollution, and left for several hours, preferably overnight. Brush off dirt in the morning.

Some housewives have got used to using Coca-Cola. Its use is often discussed on women's forums when it comes to how to clean rust in the toilet at home and what cleaning products are the most effective.

The effectiveness of "Coca-Cola" is easy to explain: the drink contains phosphoric acid, which helps fight rust. Sweet soda should be poured onto contaminated areas and left for at least an hour. You can moisten a rag with cola and treat problem areas with it. Also, before and after the procedure, you can use a brush - mechanical action will help to remove plaque more effectively.

Some people heat the cola slightly before use for greater effect, or use it in the final stage of cleaning the toilet, after it has been cleaned out with a solution of baking soda and vinegar, for example.

Of course, the described methods are unlikely to help to cope with old stains, but with a little bloom - quite.

With the help of what else you can get rid of rust, see a useful video: