How to quickly wash your hands from cured polyurethane foam

2024 Author: James Gerald | [email protected]. Last modified: 2024-01-12 17:37

Many of those who were engaged in repair work at least once faced a problem when the sealant got on the skin. Hence the question automatically arises: "How can I wash my hands of dried polyurethane foam at home?" Since the sealant adheres to the skin almost instantly, it is not so easy to get rid of it, especially if you do not take action right away. Consider the most effective ways to remove polyurethane foam from your hands.

We act immediately

Polyurethane foam sealant is used in the implementation of repair, construction and finishing works. It is mainly used for sealing cracks and warming a room. It is difficult to imagine carrying out such work without the use of polyurethane foam.

When using the sealant, you should take care of safety and wear gloves so that the composition does not remain on your hands. However, not everyone follows this recommendation and it is not uncommon for the sealant to get on the skin. And then the question arises: how to wash your hands from not dried polyurethane foam at home?

If the mixture accidentally ends up on your hands, then it must be removed immediately, otherwise it may harden and then it will be very difficult to remove it. To do this, take a damp cloth and remove the foam from your skin. Try not to smudge the product. Move from the edge of the spot to the center. Remove the outer layer first, and then move on to the rest. You don't need to rub hard.

Hot water is an equally effective method. Take a basin. Fill it with hot water, add some liquid soap (preferably laundry soap), detergent or rinse aid, and place your hands in it for a few minutes.

Special cleaners

If you didn't manage to remove the residues, then how can you quickly wash the polyurethane foam from your hands at home? Special chemical compositions are effective means. Let's consider each of them in more detail.

Aerosols

Sealant manufacturers also produce special solvents in the form of aerosols that help remove dried foam from surfaces. The products also work well with blemishes left on the skin.

Experts recommend purchasing a solvent along with the sealant. It is good if they are from the same manufacturer, then the effect will be much better.

All that is needed is to spray the aerosol over the contaminated area and wipe it with a damp cloth.

Liquid solvents

If you do not know how to wash foam from your hands at home, try using liquid solvents. We are talking about such substances:

• petrol;
• acetone;
• kerosene;
• White Spirit.

A nail polish remover copes well with such contaminants. The tool quickly removes even the sealant embedded in the skin.

All that is needed is to apply one of the proposed means on a cotton pad and walk through the dirt remaining from the polyurethane foam. The duration of the procedure varies from 15 minutes to half an hour, depending on the size of the spot and how long it stays on the skin.

It is worth noting that solvents should be rarely used when other methods have proved powerless, because they can harm the skin. In addition, inhalation of their vapors is also unsafe for health.

Dimexide

How else can you wash your hands of polyurethane foam at home? Try Dimexidum. It is a drug that has anti-inflammatory and analgesic effects. But these are not the only advantages of using it. It is also often used when the sealant gets on the skin.

Just be careful, as Dimexide often causes an allergic reaction. Therefore, before using it, do a test. Apply a drop of the product to the back of the base of the hand and watch the skin's reaction. If there is no irritation, then feel free to use Dimexide to remove polyurethane foam from your hands.

Folk remedies

There are safer methods that do not cause an allergic reaction and do not adversely affect the skin. The most effective experts say salt and vegetable oil.

Heat the oil well (so that it does not burn the skin, but is hot), moisten a cotton pad in it and wipe the dirty area, then rinse your hands with water. The exposure time is 10-15 minutes.

You can apply laundry detergent or any kind of cleaning agent to the stain, then rub your hands with the hard side of a sponge and rinse with warm water.

Salt is an equally effective method. It can also be applied to dirt and rubbed on the skin. Then you should wash your hands under warm water and soap.

Interesting! How to remove tough stains at home

How to wash dried foam

And how to wash the frozen polyurethane foam from your hands at home? Unfortunately, this is quite difficult to do. The manufacturer claims that the hardened sealant can only be removed mechanically or wait until it falls off by itself after a few days. The above tools will not help here.

It is not necessary to scrape off the hardened residues with sharp objects, as there is a high probability of infection and severe irritation.

For this it is better to use:

• sandpaper;
• pumice;
• hard brush;
• the hard side of the sponge.

Before treatment, apply a greasy cream or oil to the skin. This will reduce the likelihood of damage. Next, you need to lather the surface of the objects and rub the place of contamination thoroughly. After treatment, lubricate the skin with cream again.