How beautiful to decorate a bottle of champagne for the New Year 2020

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

Even the most presentable bottle of champagne is made to a certain standard. And if you want something unusual for the New Year 2020, now we will tell you how you can decorate a bottle of sparkling wine with your own hands.

Decor of a bottle of champagne for the New Year using decoupage technique

Decoupage can be called the easiest way to decorate a bottle of champagne with your own hands for the New Year. The master class is very simple, you don't need to draw anything here, just choose a beautiful napkin and follow the step-by-step photos.

Required material:

• a bottle of champagne;
• acrylic paint;
• napkin with a pattern;
• PVA glue;
• hot glue;
• acrylic lacquer;
• sparkles.

Master Class:

• We take a bottle of champagne, remove the labels from it, rinse it well and degrease it, for this you can use a nail polish remover.
• Using a sponge, paint the bottle with white acrylic paint on all sides, leave it for 1, 5-2 hours so that the paint layer dries well.

• Now select a napkin with a New Year's theme and remove the topmost layer with the pattern.
• After that, we apply a thin layer of PVA to the bottle, apply a drawing, put the file on top and smooth the napkin through it. We act very carefully, as the napkin is thin and can tear.
• Then we remove the file and apply a thin layer of PVA glue on top of the napkin.

• As soon as the glue dries well, cover the drawing with acrylic varnish.
• Now we take hot glue and make smudges on the neck of the bottle, as in the photo.

Then, using a sponge, cover the resulting icicles with acrylic white paint

Then we apply a layer of acrylic varnish and sprinkle with sparkles. You can also decorate some fragments in the drawing and the bottom of the bottle with sparkles

If there is no hot glue, then wrap the neck with twine, fix it with PVA glue and then paint it white. It will also turn out beautifully and original.

Do-it-yourself Snow Maiden on champagne

Today there are different master classes with step-by-step photos, thanks to which you can learn how to decorate a bottle of champagne for the New Year 2020 with your own hands. And among the many interesting ideas, I would like to highlight such an unusual decor - Snow Maiden with champagne.

Material:

• a bottle of champagne;
• corrugated paper;
• artificial fur;
• ribbon;
• organza with glitter;
• candies;
• snowflakes;
• glue.

Master Class:

• We wrap a bottle of champagne in white corrugated paper to determine the height and width.
• Cut off a piece of corrugation to the desired size and glue the two edges together.

We put the resulting cylinder on a bottle of champagne, glue a silvery thin tape to the upper edge and stretch the paper

• Next, we take a piece of white faux fur measuring 12 by 50 cm.
• Apply glue to the reverse side of the fur and glue it in the opposite direction, not reaching the top edge of 3 cm.

• Now we take a 4 cm wide strip of faux fur and glue it lengthwise to the bottle right in the middle.
• Next, at the bottom of the bottle, glue a piece of fur 12 by 50 cm in size. First, we fix the beginning and end of the piece, and then we glue and glue the bottle around.

For the master class, you will also need sweets, choose sweets in sizes 2, 7 by 3, 5 cm and so that the wrapper is made in light blue, that is, in the color that most suits the Snow Maiden's fur coat

• Now we take one candy, put glue on the edge and glue it on the right side of the apron. Then we take the second one and glue it on the left side.
• As soon as the two candies are glued on both sides, glue the bottle with sweets in a circle. We also apply glue to one edge and glue the candies as tightly as possible to each other. We try to keep as little free space as possible between them.

• Cut out a piece measuring 20 by 50 cm from organza with glitter.
• Fold in half and round off one edge with scissors.
• Cut off a long strip 1 cm wide from the artificial fur.
• Now we glue the rounded edge of the organza with a piece of fur, leaving only the upper part intact.

• Apply glue to the edges of the resulting cape, glue it to the beginning of the apron on one side and the other, and then fix the rest.
• From the fur we cut off another piece measuring 25 by 6 cm and make a collar for the Snow Maiden.

• Cut off a piece of 10 by 4 cm from the blue corrugated paper, put it on the very top of the neck of the bottle, stretch and glue the two ends. Then we form a hat as shown in the photo.
• Now we decorate the bottom of the hat with fur, and glue a snowflake in the middle on top.

Here is such a beautiful Snow Maiden turned out. If you do the work carefully, then the coat with sweets can be easily removed from the bottle. And if you choose candies in a red wrapper, then you can make Santa Claus.

Decorating champagne in the shape of a Christmas tree

If you really want to surprise your friends or loved ones with an unusual gift for the New Year 2020, then be sure to take the proposed master class with a step-by-step photo for a note. Here you will learn how you can decorate a bottle of champagne in an unusual way with your own hands.

Material:

• a bottle of champagne;
• gold ribbon;
• New Year's toys;
• beads;
• tinsel;
• cardboard;
• glue, scissors;
• pencil, ruler.

Preparation:

First, let's prepare such a removable paper case. To do this, we take a thin sheet of paper, wrap it around the bottle, fix it with tape and make cuts on top to expand the bottle

We transfer the resulting template to cardboard, cut it out, fix the edges with a stapler and glue

Now we glue the lower part of the cardboard cover with tinsel, make two turns

Then we take the candies, we glue one tail to the candy itself, with the help of the other we glue it to the bottle, as if these are Christmas decorations that hang on the tree

• Then we go up and in a spiral we decorate the bottle with tinsel and sweets.
• We also decorate the resulting Christmas tree with Christmas decorations, ribbon bows, large and small beads.

Here is such an elegant Christmas tree, it remains to glue only a large bow to the neck. Such champagne can be put on a festive table or presented as a gift.

Champagne and tangerine pineapple

Today, master classes on making pineapple from champagne and sweets are especially popular. But now we want to tell you how to decorate a bottle of sparkling wine with tangerines and get an original decoration for a festive table for the New Year with your own hands.

Material:

• a bottle of champagne;
• tangerines;
• satin ribbon;
• corrugated paper;
• corrugated cardboard;
• sisal;
• twine thread;
• glue.

Master Class:

To begin with, we will prepare the tangerines, for this we tie each fruit with a satin ribbon as shown in the photo, fasten the ends of the ribbon with glue

• We take the bottle and cut out the corrugated cardboard base according to the size of the bottom.
• On one side of the cardboard base, glue a small square cut out of orange corrugated paper.
• On the other side we glue a square, which is 1 cm larger than the circle.

• Cut off sharp corners at the square, apply glue to the edges and glue the paper to the cardboard.
• Now we also cut out a rectangle from orange corrugated paper, which in size should be 2.5 cm below the day of the bottle and not reach the neck of 4 cm.
• Next, measure 3 cm on paper from the top, make holes into which we insert a green satin ribbon.

• Then we retreat 2.5 cm from the bottom and glue the bottom of the cardboard.
• Apply glue to the remaining 2.5 cm of paper and also glue it to the bottom.

• Insert a bottle of champagne into the resulting bag, tie a ribbon to a bow.
• Now we take the tangerines, put glue on the tape and glue the fruits in one row.

• Next, just above the tangerine, glue the green sisal.
• Then again we make a row of tangerines, and so on until the very neck.
• Cut out a rectangle from green corrugated paper, wrap the neck, glue the edges.

• Now, also from the green corrugation, we cut out 12 blanks with dimensions of 10 by 4 cm and 8 blanks with dimensions of 16 by 4 cm.
• We make leaves from each blank. To do this, cut off the sharp edges, pull in the middle and stretch with scissors.

• And now we glue the leaves to the neck. We make the first row of 4 smaller petals, then glue rows 2 and 3 in a checkerboard pattern. For the next rows, we use larger petals. We glue the last row on the bag so that it is easy to get the bottle out of it.
• We decorate the bottom of the neck with sisal and tie it with twine thread. And such a delicious, aromatic and bright pineapple is the result.

How to make Santa Claus from a bottle of champagne

You can decorate a bottle of champagne for the New Year with your own hands with sweets, ribbons or fruits. But the proposed master class with a step-by-step photo will tell you how you can make a real Santa Claus.

Material:

• felt;
• braid;
• artificial fur;
• rhinestones;
• a bottle of champagne.

Master Class:

• We wrap the bottle of champagne with red felt and mark from the bottom to the point where the bottle begins to taper.
• Cut out a rectangle of the required size and glue the two edges together.

The bottom is already ready, now we make the top and for this we also take a piece of felt and wrap the bottle as shown in the photo

• We leave the length of the girth of the bottle, and mark the height in a circle to the bottom part.
• Cut out along the outlined lines, glue the edges together, but at the same time do not glue it to the very bottom, leave 1 cm.

• We put the upper part on the bottle, tuck the bottom a little and glue the two parts together.
• To hide the seam between the lower and upper parts, take the braid and glue it.

• Now, along the center of the bottle, glue the cut-out rectangle made of fur.
• We also glue the bottom with a piece of fur and make a collar.

Interesting! How to make a do-it-yourself photo zone for the New Year 2020

Then glue rhinestones in place of the buttons and the fur coat is ready

• We proceed to making a hat and for this we cut out a rectangle with dimensions of 14 by 5 cm and a circle with a diameter of 5 cm from felt.
• Next, we sew two edges of the rectangle and sew a circle to the resulting cylinder.

We turn the hat onto the front side and glue the fur below

If desired, you can glue a beard to the hat. To do this, cut out a crescent-shaped blank from white felt and glue artificial hair to it. That's all, we put a hat with a beard on the bottle and we get a real Santa Claus.

Champagne decor "Twine herringbone"

Today, twine is often used for decoration, because you can make very beautiful crafts from it with your own hands. And this material is also perfect for decorating a bottle of champagne in an original way.

And the proposed master class will tell you how to get an elegant Christmas tree from an ordinary bottle of sparkling wine for the New Year 2020.

Material:

• a bottle of champagne;
• thin felt;
• Double-sided tape;
• hot glue;
• twine;
• wire;
• Christmas tree decoration;
• candies;
• New Year's decor.

Master Class:

1. We take a bottle of champagne and wrap the lower part with thin green felt.
2. We fix the material in a circle with double-sided tape.
3. Remove excess felt with scissors.
4. Tear off the scotch tape and wind a thin twine in a circle.
5. Now we also glue candies to the bottle in a circle, which it is advisable to choose in a green package.
6. Next, we make the top for the future tree and for this we take a sheet of cardboard, twist it into a cone, fix it with double-sided tape.
7. We cut off the cone and wrap it with twine in a circle. It is better to stick the scotch tape all over the cone, so the string will hold better.
8. Glue the bottom of the cone up to half with tape and wrap the other half inside the cone.
9. For the very top, we take a small piece of wire, wrap it with twine.
10. Then we twist the wrapped wire in a couple of turns and attach the resulting curl to the very top of the cone.
11. Glue a felt strip to the pre-glued adhesive tape with assembly.
12. Now we wind gold beads along the entire length of the cone.
13. We glue several small spruce twigs, artificial berries and a small cone to a piece of cardboard. We get a beautiful decoration that we attach to the Christmas tree.
14. And the final touch - we hang a Christmas tree toy at the very top. We put the cone on the bottle and get an elegant Christmas tree with sweet toys.

Today, the Christmas decor of sparkling wine bottles has a special polarity. Unusually decorated champagne will immediately cheer you up at the festive table, and will also serve as an excellent gift for the New Year 2020. In addition to the proposed master classes, you can decorate a bottle of champagne with your own hands under gold, ribbons. The wine will look original, both in openwork and in a fur dress.