New Year's eve of 2022 on windows and templates to print

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

In order not to think about what kind of New Year's protrusions to make for 2022 and not waste time creating them, you can print ready-made templates for windows. But not everyone knows how to work in this technique and what to do with blanks. Therefore, you should figure it out in advance.

Unusual paper handling technique

Before you can print New Year's patterns on windows by 2022, you need to study what this paper technique is. In simple words, vytynanka is cutting out patterns and animals in an openwork way. For example, snowflakes for the New Year are made using this technique.

Varieties of protruding

Vytynanka are of several types:

• flat - great for gluing to windows and using in crafts made using the scrapbooking technique;
• 3D effect - some elements of the picture are slightly bent, which creates only the illusion of a three-dimensional picture;
• three-dimensional - it is customary to refer to this category of protruding as real 3D-crafts that can be viewed from different angles.

The latter direction was invented in Japan. It was founded by M. Chatani in order to embody his ideas with the help of a special cutting technique.

Interesting! DIY garlands for the New Year 2022

What vytynanka to make by 2022 New Year

You can print different templates for New Year's pimples on windows by 2022. But you should choose pictures that will create a festive atmosphere in the house. The most popular are:

• snowflakes;
• large Christmas trees;
• animals associated with winter;
• symbol of the year.

In 2022, the Blue Water Tiger will be the symbol. It is with him that you should cut out the protrusions on the windows.

What needs to be prepared for cutting out recesses

The process of cutting out recesses should begin with the preparation of tools. For work you will need:

• a sheet of paper, cardboard, foil;
• special backing - to protect the table and get smooth lines;
• cutters - a set of knives with replaceable attachments.

In shops for creativity, you can find ready-made kits for cutting out recesses. They are not cheap, so you should only buy them for permanent use. In other cases, these will be unjustified costs.

If it is not possible to purchase a ready-made set, all its components should be replaced. Instead of a special self-healing rug, you can take a sheet of thick cardboard, wooden board or plywood. The incisors can also be replaced with other tools:

• scalpel;
• stationery knife;
• an ordinary knife with a thin blade;
• breadboard knife;
• scissors.

When cutting out recesses, the scissors can only be used for the main contour. You will not be able to wield them inside, because the picture will be very wrinkled.

Interesting! What to give for the New Year 2022 to a husband who has everything

How to cut out recesses correctly

There is no special technology for cutting out recesses. Professionals advise to adhere to a number of rules to achieve a result:

• start cutting the picture from the middle;
• first of all, small parts are removed in hard-to-reach places;
• make larger holes last;
• the main contour is removed after cutting out all the internal parts.

This technique will allow you to cut the picture faster and more accurately. It will be easier to hold the workpiece by the free part of the sheet, it will not begin to slide at the most inopportune moment.

What paper to choose for vytynanka

Trims from thin paper look spectacular. However, it can be difficult for those new to the field to work with this kind of material. It will take time to get used to working with a knife.

Experts advise choosing the densest materials to get acquainted with the technique. Gradually, you can use thinner paper to get used to the changes. This will allow you to adjust the degree of pressure on the knife and make the edges neat, not torn.

Use thin paper for tucking only if you are confident that it will work with the material.

The cutting technique is unusual and interesting. If you learn how to properly wield a knife, then over time you can create interesting and unusual pictures. But working with complex materials at once does not always bring the desired effect, which can frustrate and discourage the desire to make vytynanka.

What else can you make vytynanka

In 2022, professionals choose different materials for the manufacture of protruding holes:

• paper of different weights;
• cardboard;
• tracing paper;
• foil;
• craft paper, etc.

The degree of pressure on the knife during cutting depends on the material. The most careful work should be done with foil and tracing paper. With sudden movements, they tend to break. All actions must be smooth so that the result meets expectations.

The densest material for cutting out recesses is cardboard. It is not recommended for beginners to use it, because when working with it, you need to press on the knife with more force. Not everyone can do it the first time.

In order to learn how to make cardboard cutouts, it is necessary to gradually increase the density of the material, starting from paper.

How to fix the vytynanka on the window

Various methods can be used to fix the protrusion. The most common are:

• PVA glue - it securely fixes the paper, but it should be used in small quantities so that there is no dirt;
• transparent or double-sided tape - the protrusions can be easily removed, but when using double-sided tape, the side of the craft on which it will be fixed should be left white;
• soap solution is the most common way to fix the protrusion on the window; after taking the picture, it is enough to wipe the surface with a damp cloth to remove stains.

On a soapy solution or paste, you can glue a tuck from a thin material. Heavy pictures will fall off.

Interesting! What to give a teenager for the New Year 2022

Is it possible to paint the vytynanka

If the protrusions are made of white paper, then they can be decorated. In 2022, the Blue Water Tiger will become the symbol of the year. Experts believe that preference should be given to shades of Gzhel.

For the design of the protrusions, it is better to use:

• blue;
• blue;
• turquoise;
• purple;
• lilac, etc.

Patterns can be applied in thin lines in black or white. If you want to add more shining elements, then you should use silver paint or glitter of this color.

Tiger recessed patterns

Experienced needlewomen come up with vytynanka on their own. In 2022, templates for New Year's pictures for windows can be printed. Ready options are presented below.

Outcomes

To simplify the work, the finished vytynanki are printed on a printer and cut along the existing contour. It is better to choose templates with thin lines so that they are not visible in the finished picture. Cutting out the tuck should start from the middle, gently holding the edges. This will allow you not to spoil the picture and maintain its previous appearance.