How to quickly remove burnt fabrics from the iron

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

Sometimes housewives ask themselves the question: how to clean the iron from burnt fabric at home? Modern devices do not need careful maintenance, but if the recommended ironing regime is not followed, stains may appear on the sole. Therefore, you need to know about the most effective ways to clean your iron.

Method selection

If you do not know how to clean the burned-in fabric from the iron at home, choose the appropriate method based on the sole material. Modern devices can have steel, ceramic or Teflon surfaces. The least capricious is stainless steel. It can be cleaned in the simplest ways.

The most popular at the present time are irons with a ceramic surface. They iron well and do not tolerate abrasion. Even hard sponges and brushes have a negative effect on ceramics.

Teflon is considered an even more capricious material. Carefully remove burnt tissue from its surface.

Cleaning the teflon coating

How to clean the iron from burnt fabric at home? The brands Tefal, Philips, Bosch can be safely called the most popular. Each of them produces irons with different surfaces (steel, ceramics, teflon). Manufacturers claim that Teflon has non-stick properties. But practice shows that traces of burnt tissue remain on it.

Teflon outsole perfectly smoothes all fabrics. It heats up quickly and is easy to use. But it must be cleaned very carefully, since Teflon is a delicate and fragile material.

What means is used to clean Teflon:

1. Specialty pencils are the best cleaner to remove adhering tissue. They are easy to use. It is enough to heat the iron and treat its sole with a pencil, which melts and flows from the surface, taking away carbon deposits. After cleaning, wipe the iron with a soft cloth to remove any residual product. Chemical pencils work flawlessly, but they give off an unpleasant scent. Therefore, after using them, you will have to ventilate the room. In addition, care must be taken to prevent droplets of the molten substance from falling on your hands. The acid causes burns.
2. If you urgently need to iron things, but there is no pencil in the house, use vinegar. It can be used to gently remove burnt plaque using a soft cloth. True, you will have to spend a lot more time if the pollution is serious enough.
3. If it was not possible to clean the sole with vinegar essence, you will have to use another method. A cotton cloth should be well moistened with vinegar and then ironed with a hot iron. As a rule, all contamination is gone.

Interesting! How to remove thick carbon deposits from pans

Top best products for ceramics

How to clean the burned-out fabric from the iron at home? Ceramics are popular among consumers. Ceramic soles glide easily and smooth out creases efficiently without leaving marks on the fabric. Plus, they weigh less than their metal counterparts.

Ceramics are very fragile and must be handled with care. The easiest way to clean it is with a special pencil. But abrasives are prohibited.

If for some reason there is no chemical pencil in the house, you can clean the sole with a paraffin candle. To do this, its edge is wrapped with a cloth so that the hot mass does not burn you. The iron is heated and the sole is rubbed with paraffin. During processing, he must stand at an angle so that the hot mass flows down. After cooling, the ceramics are carefully treated with a soft cloth.

Vinegar works well for fresh traces of burnt tissue. It can be used on metal and ceramic surfaces. If you don't have vinegar in your home, you can replace it with citric acid, which will have to be dissolved in water.

We suggest watching a useful video before cleaning the iron.

Aggressive methods

How to clean burnt fabric from the iron at home? Soda, salt, vinegar and other substances can help resolve the issue. But such methods are not suitable for processing Teflon and ceramics.

As for metal and aluminum irons, they can be cleaned as follows:

1. Hydroperite tablets are an aggressive agent that is not suitable for all surfaces. They are diluted with water to obtain a slurry, which is applied to the sole. The iron must be warmed up and then turned off. After complete cooling, the sole is wiped with a dry soft cloth.
2. Some housewives recommend wiping the iron with ammonia. You can also use hydrogen peroxide. Both solutions are applied on cold soles. Alcohol and peroxide vapors are very harmful, so the treatment is best done outdoors or in a ventilated area.
3. Soda is used only for metal surfaces. But abrasives are not suitable for ceramics and Teflon. A little water is added to the soda powder to make a gruel. The resulting mixture is applied to the contaminated areas and rubbed with a soft cloth or sponge. Powder residues are removed with a damp cloth.
4. To clean the steel soles, use toothpaste. It can remove fresh dirt. To clean with the paste, you will have to rub the surface thoroughly.
5. You can clean the sole with salt. It is scattered on thick paper and ironed with a hot iron. Salt treatment is continued until all impurities are gone. Some housewives recommend pouring crystals into a sock and use them to treat the surface of the iron. In any case, this method is not suitable for ceramics and Teflon, since it is based on the use of an abrasive substance.