How to descale a kettle using citric acid

2024 Author: James Gerald | [email protected]. Last modified: 2024-01-12 17:37

No matter how expensive and beautiful teapot you buy, scale will certainly appear in it. Even expensive filters that purify water do not save you from the problem. There is no need to ignore the problem, since scale leads to damage to electric kettles. In enamelled containers, deposits turn into an explosive mixture combined with rust. The question arises: "How to clean the kettle?" Citric acid is a faithful assistant in the fight against deposits. It is completely harmless and inexpensive. Its use allows teapots to return to their original whiteness.

The causes of scale

No matter how hard you try, in the process of using the kettle, an ugly hard coating will appear on its inner surface. Not all housewives think about the need to remove calcium salts. It must be understood that limescale deposits are not only an aesthetic defect. Because of it, the water changes its taste and smell.

In addition, plaque leads to breakdowns of electrical appliances and corrosion of enamelled ones. If you're not sure how to clean your kettle, citric acid can help solve the problem. This cheap product is highly effective. With it, you can return the cleanliness of the dishes.

Limescale is a hard deposit and appears during boiling. This phenomenon occurs due to a normal chemical reaction. As a result, potassium and calcium salts appear on the bottom and walls of the containers. Over time, their layer grows, which leads to an increase in the boiling time of the liquid.

Rust often develops under the bloom. It is better to discard such a kettle. To avoid such situations, it is necessary to regularly remove plaque. It is much easier to remove a thin layer of salt than large deposits.

Many women, thinking about how to descale the kettle, forget about citric acid. Chemicals are widely presented in stores. But using them comes with a risk when it comes to cookware. It is much easier to use the proven folk method by taking citric acid. Our grandmothers also knew how to clean the kettle without harm to health. In those distant times, there was still no such arsenal of household chemicals, but folk methods were saved.

Interesting! Little tricks for your home

How to descale an enamel teapot

Citric acid is a universal product that gently removes salt build-up from the surface. Powder is always in stock for every housewife. It is inexpensive, but it gives excellent results.

How to properly clean the kettle:

1. Fill a container with cold water (the liquid level should be higher than the level of deposits on the walls).
2. Pour several packs of citric acid into the kettle. Stir the powder in water.
3. Bring water to a boil. After the fire must be turned off.
4. The kettle with water should stand for some time (at least an hour) for the scale to move away from the walls of the container.
5. After that, the used acid water must be discarded. The sides and bottom of the kettle must be cleaned with a hard washcloth to remove scale.
6. Large deposits sometimes do not dissolve the first time. If you notice that not all plaque has been washed off, repeat the procedure again.
7. Pour cold water into a cleaned kettle. It must be brought to a boil and then poured. Rinse the dishes with clean water. It is now ready to use.

Now you know how to clean a teapot with citric acid. “How much powder to pour” is a frequently asked question. On average, it is recommended to add 1-2 packs to the container. The amount of acid depends on how dirty the dishes are. One pack is not enough to remove a thick layer of salts.

For women who doubt the effectiveness of citric acid, we suggest watching the video.

How to descale an electric kettle

Citric acid is also suitable for metal and plastic utensils. But you cannot use vinegar for cleaning electrical appliances.

Citric acid is the best way to keep things clean. To return the teapot to its former appearance, it is necessary to dissolve two bags of powder in cold water. On average, one to two packages are taken per liter of water. The solution is poured into a kettle, after which it is turned on.

After boiling, the water should stand in the container for a while. The cooled solution is drained, and the kettle is boiled with clean water. Monthly citric acid cleaning is recommended to prevent plaque build-up.

For clarity, we suggest watching the video.

How to descale a stainless kettle

Stainless steel kettles are also treated with citric acid. With light contamination, boiling can be dispensed with. In more difficult cases, it is necessary to boil a container with the addition of two packs of citric acid. This amount of powder is enough for a three-liter dish.

Not sure how to clean your kettle? If there is no citric acid in the house, use fresh lemon. It is cut into four pieces and added to the teapot. After boiling, the dishes will shine clean.

How to clean the inside of a kettle from rust

Citric acid is used for more than just descaling. Rust soon appears along with the plaque in the dishes. To prevent this, you need to descale regularly. Rust is removed with citric acid. After boiling with an acidic solution, the walls of the dishes must be carefully rubbed with a washcloth. Citric acid helps remove rust not only on the inside, but also on the outside.

Soda and citric acid

In the most difficult cases, experienced housewives recommend using a mixture of soda and citric acid. A tablespoon of soda is poured into a kettle with water. The solution is boiled for 10 minutes. Then the water is drained and the container is filled with clean liquid. Two packs of acid are added to it. The solution is brought to a boil and allowed to cool. Double processing gives excellent results.