How can you clean the tiles in the bathroom from plaque

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

"How to wash the tiles from plaque?" - frequently asked question. Pollution often appears here, as this area constantly interacts with water. Most often, you can see limescale, soap deposits, yellowness, fungus and rust. Today, there are many ways to get rid of such contamination. We will consider the most effective ones.

General recommendations

How to clean the tiles in the bathroom from plaque? Which means to use depends on the degree of contamination and the type of material.

For example, formulations containing chlorine do an excellent job with mold and yellow bloom. Also, in these cases, use 72% laundry soap. Light, recently appeared contamination is washed off with a soda solution, soda and citric acid. But to remove rust from tiles and limescale, products that contain concentrated acids are used.

Tips to get rid of dirt quickly:

1. Old rust or limescale can be removed with acid-based products. There is no need to be afraid that the surface of the tile will be damaged, since this material is resistant to all kinds of chemical influences. However, it should be remembered that acid-containing compounds can damage the grout in the joints between the tiles, therefore, aggressive agents should not be applied to them. Stick the tape on this area before use, and peel it off when finished.
2. It should be remembered that chlorine-containing compounds can harm colored tiles and discolor them. Therefore, such products must be diluted with water.
3. Do not use metal scrapers or brushes when cleaning tiled surfaces.
4. If dirt appears in hard-to-reach places, corners, then in this case you need to use flexible brushes for washing dishes with a long handle.
5. For cleaning the tiles on the ceiling, it is better to use dense gel formulations. They will not run down the walls and drip onto the floor. They are easy to apply and maintain for the required amount of time.
6. After using any detergent, rinse the tiles several times with clean water. So that there are no divorces left.
7. Steam cleaners are good for tiled surfaces. In addition to their cleaning functions, they have disinfecting properties.

When asked how to clean ceramic tiles from plaque in the bathroom at home, some housewives have an exact answer: a melamine sponge. When water gets on it, a lot of foam is formed. It copes well with all kinds of dirt without the use of cleaning agents. Many people confirm the quality of melamine sponges. However, some have concerns about leaving scratches on delicate tile surfaces after use.

Interesting! How to quickly wash a shower stall from limescale

Use of improvised means

Many people ask the question: "how to wash the tiles in the bathroom with folk remedies for plaque?" It is quite possible. Consider the most effective available tools.

Laundry soap

The tool does an excellent job with yellow bloom on tiles and whitens them perfectly. To do this, you just need to rub a brush, sponge or rag soaked in water with laundry soap, treat the surface and leave to act for half an hour. Then the product must be thoroughly rinsed with water and the surfaces wiped dry.

For white tiles, it is best to use a bleaching laundry soap. It is better not to use such a tool on colored tiles.

Vinegar

Vinegar works well for cleaning limescale tiles. Using a spray bottle, it is sprayed onto the surface and left to act for several minutes, then washed off with water.

Remember: vinegar cannot remove stubborn plaque. But together with salt, it copes well with rust. To do this, soak the brush in vinegar, sprinkle it with salt and gently walk over the surface of the tile. Salt with large crystals should not be used in this case.

Soda

Another way to help clean tiles from plaque with folk remedies is soda. With its help, you can easily cope with greasy deposits, mold, fresh rust, limescale and any other contamination.

To begin with, you need to wet the tiles, and soak a wet sponge in soda. Then you should walk along the surface of the tile. The baking soda should be left to act for half an hour, then walk over the tile with a flexible dish brush or the hard side of a sponge. After that, the surface is wiped with a cloth soaked in water several times so that no streaks remain.

For glossy tiles, use soda ash. It copes well with dirt and does not damage its surface, since it has practically no abrasive particles. Another advantage is the absence of streaks after using it.

Hydrogen peroxide

Another effective method that allows you to quickly and easily get rid of soapy, yellow, light limescale, any stains at home is hydrogen peroxide. You need to use a 3% product. Peroxide should be applied to the surface several times, only then it will be possible to wipe off the resulting stains.

Ammonia

Alcohol itself is not able to cope with pollution. It is added to tile cleaners to prevent streaks on the surface.

Lemon acid

Citric acid and lemon juice dissolve limescale and provide a light whitening effect. A sponge soaked in water is dipped in citric acid and the surface of the tile is wiped, then left to act for 2-3 minutes. Then wipe the surface with a clean cloth.

If you have a glossy tile, then it is better to dissolve citric acid in water. Remember: this product is not used to clean the joints from dirt, as citric acid can dissolve the grout.