How to make a pumpkin for Halloween 2019 with your own hands

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

It is important to figure out how to properly make a pumpkin for Halloween with your own hands, otherwise the vegetable will be spoiled. To make it work, see the best photo cutting ideas step by step and repeat the master classes. This tutorial also explains how to make a pumpkin decoration from other materials, including paper.

The largest lantern pumpkin

In European countries, this day is considered the most terrible year: on the eve of All Saints Day, the border between the world of people and spirits is thinning, and the latter can break free. Therefore, in order not to fall victim to them, people themselves dressed like monsters, and to scare away evil spirits from their home, they made huge pumpkin-lanterns.

In order to decorate the house for Halloween 2019, do not neglect this decoration and choose the largest and heaviest pumpkin on the market.

And then we start creating the lantern:

1. To make a Halloween pumpkin with your own hands, cut out a lid from the top of the pumpkin. To do this, immerse a sharp knife at an angle. It is this technique that will allow the lid not to fall inside, even when all the pulp is removed from the vegetable. Pierce the skin and make a 3-4 cm incision, then repeat the process. And so on until we draw a circle.
2. Gently pull up, take out the future lantern cover and immediately clean out the pulp.
3. We lower the spoon inward and remove the bones in a circular motion. Subsequently, fry them in the oven to use for baking. Scrape out all the pulp.
4. Take a simple pencil and draw three identical triangles that mimic the eyes and nose.
5. Then we draw a mouth with sharp teeth according to the template.
6. Cut along the outlined lines so that the tip of the knife goes inside the pumpkin.

This is one of the easiest ways to make a pumpkin lantern for Halloween with your own hands. To prolong her life, we treat it with hairspray.

We make small cuts inside and insert silica gel balls into them to keep moisture in the vegetable and prevent it from drying out prematurely. This is required if Halloween 2019 preparations start before October 31st.

Other pumpkin carving options

If you are planning a grand party and you need to think about how to make many different pumpkin options for Halloween, working exclusively with your own hands, do not despair. From pumpkins of different sizes, you can come up with many interesting decorations or download templates on the Internet, translate and cut. Below are the best photo ideas step by step that are easy to bring to life.

Pumpkin riddled with light

To create such a decorative craft, you will need a drill. And if she is not there, you need to ask a man with strong hands to make holes with a screwdriver.

We circle the top with a dark marker and cut it out with a knife at an angle. Then it will not sink inside

Cut off the softest part with seeds from the cap and select the insides from the pumpkin

We arm ourselves with a drill and drill a lot of identical holes in the vegetable, located two centimeters from each other

We wipe it inside and out, place a candle inside and put it in a prominent place

Drawings by templates

To the second pumpkin we attach the "muzzle" that we found on the Internet. We translate the drawing into a vegetable and cut it out with a sharp knife with notches. It will be faster and easier this way.

Cut out sharp predatory teeth from a large piece and fix it in the mouth of the pumpkin monster with toothpicks

We make smaller teeth from square pieces of vegetable and fix in the same way

Lover of blood and sweets

To make the decorations look spectacular, do not use ordinary candles. We take colored LED lights or use pendant lights in multi-colored glass.

We cut out the features of the pumpkin according to the new pattern, take out all unnecessary things

We fall asleep inside the candy and make a path out of them on the tray

Water the mouth of the monster with artificial blood. If it gets on the sweets, it's not scary, because the wrapper protects them

Insert a candle or a flower with dense foliage inside to make an interesting hairstyle option

For greater brutality, we insert a skewer with a plate attached to it, decorated with bloody handprints, into the top of the sweet-tooth pumpkin

Insolent and spiteful

From a pumpkin, where the stalk remains of a good size, you will get a very cute craft.

We cut off not the top of it, but the side part so that it stands with an upturned nose on its muzzle. We take out the pulp

We draw elongated, like a cat's, eyes and a wide-open mouth

Remove only the upper orange part from the eyes, and in the case of the mouth, cut through only the upper part of the smile

From the bottom, just remove the skin and create gaps between the teeth. Draw the pumpkin's pupils with black acrylic paint

If the lid does not hold and falls off, we fix it with toothpicks. This way the craft will last longer and won't dry out too quickly.

With a small pumpkin in its mouth

For this craft, you need to find the medium and smallest pumpkin, which are often sold in vegetable markets and in large supermarkets.

We draw a face. We bring out wide predatory eyes-triangles and a zigzag wide mouth

Cut along the lines and erase the rest of the marker

We insert a small pumpkin into the mouth and pour it with artificial blood

Put a bowl of water inside and add dry ice. This will create the effect of a smoking mouth

If you want the party to be spectacular, put a bowl of soapy water in one of the pumpkins and dip dry ice into it. Small soap bubbles will come out of the mouth. And these are not all the best ideas with photos and master classes step by step.

And if you are tired of traditional orange shades, refer to the pictures with design options. Paint pumpkins in your favorite colors, glue rhinestones to them, tape with a glue gun, or insert nails, buttons and thread chains. On this holiday, you can show your imagination and do what you like most.

Papier-mâché pumpkin

If you don't like fiddling with cutting an orange vegetable, check out how you can make a DIY Halloween pumpkin out of very large paper:

Inflate the balloon and tie the ponytail. We do not fill it completely, leaving it slightly soft so that it does not burst at the most inopportune moment

We tie a twine to the tip of the ball and wrap it around, creating a pumpkin shape so that the edges stick out under the pressure of the thread. To prevent the thread from sliding out, we fix it with tape or plaster. And if it doesn't work, we just fix it with nodes from above and below

We glue the ball with strips of newspaper soaked in PVA glue or homemade paste. We build up the paper pulp in 3-4 layers and leave it to dry completely in a well-ventilated room

Apply a layer of PVA glue with a brush for the strength of the craft and leave to dry

We paint with white acrylic paint or cover with an aerosol can. We choose the color at our own discretion

Untie the tail of the ball and insert a piece of foil rolled into a tube inside. We glue it with white adhesive plaster and coat it with PVA glue

We take "zero" sandpaper and clean all the roughness on papier-mâché

Pour orange paint into the palette and paint the pumpkin blank with a brush. In darker shades, draw the bending lines and the tail of the stalk

Such a decoration, made for Halloween 2019, will stand for a very long time if someone does not sit on it.

Interesting! What date is Tourism Day in 2019

By the same principle, you can make a pumpkin from cement or putty. To do this, knead a solution of the consistency of thick yogurt and fill it with nylon golf. Then we tie it up with ropes, creating convex sides, and twist the top of the golf course. We leave the workpiece to dry for two days, remove the nylon and clean it with a sandpaper. We paint in any color with the most common acrylic paint.

Pumpkins made of paper without and with glue

If you need to quickly decorate an apartment and want to attract children to creativity, you can make decorations without using glue. How to assemble a pumpkin for Halloween with your own hands from paper, you will learn from the master classes.

Of two wide stripes

In order to bring to life the best ideas for MK with a photo, you need to do everything step by step. And to make the craft bright and interesting, it is better to take double-sided colored paper.

Fold the orange sheet in half lengthwise, unfold and cut along the fold line. We fold the two halves into a single line and connect with tape

We bend the right and left sides to the middle, smooth it out. Fold the right side of the paper back to the edge. We do the same with the left. Turn over and repeat the bends to the center and to the sides

We fold the resulting element in the opposite direction. We iron all the edges so that they do not swell

Bend the rectangle into a square. It turns out to be a small book. We put it aside. We take green paper and draw a pumpkin stalk, and then a long strip about 5 mm wide. Cut out both elements

We unfold the book in the center so that you can see the place where the tape was previously fixed

In the upper part of the formed rectangle, glue the stalk with tape, fixing it in the middle

We fold the orange paper into a book. We fasten it with a stapler at the green tail along the fold line and just above the bottom edge

Fold and draw the silhouette of the pumpkin again with a pencil

We cut along the outlined contour

We unfold and straighten all the leaves, and glue the place where the "accordion" begins with adhesive tape. We do the same where the paper clips are visible

We take a green strip and draw it with the tip of scissors so that it twists. We fix it at the stalk

Such interesting figures will be the perfect solution for Halloween 2019. If you make a lot of them, then they will be great lanterns that can be strung on a thread and hung from the ceiling or curtains.

Pumpkin from a jacket

If you don't want to bother with gluing and cutting, see how to make a Halloween pumpkin with your own hands from scrap materials. It will turn out very unusual and interesting.

We take a jacket or sweater of any color. The main thing is unnecessary. Cut off the sleeves from it along the seam line

Turn it face down and roll it into a tight roller to the middle

In the same way, we collapse the second part

We connect the two rollers in the steering wheel and put the edges in the holes left after cutting the sleeves

We fix the workpiece with safety pins so that they are not visible

We insert a stick into the middle of the knitted pumpkin, creating an imitation of the stalk. This will be the finishing touch

After that, we take the sleeves and cut off the cuffs with elastic, if any

We insert them into each other to make a denser material

We roll them up according to the same principle as the vest, and then we connect them in a circle. Fasten with pins and decorate with a stalk

Thus, you can make Halloween decorations in 2019 from things that are no longer used and waste space in the closet.

If you need visual examples of how to make a pumpkin for Halloween with your own hands from a pumpkin, see the video below. They will help you quickly navigate and understand how to create wonderful jewelry in a short period of time.