Patterns of weaving Easter eggs from beads

2024 Author: James Gerald | [email protected]. Last modified: 2023-12-17 14:00

Step-by-step patterns for weaving Easter eggs from beads for beginners can help everyone create a masterpiece from small elements. It is worth spending a few days for this, but in the end you will receive an excellent gift or decoration for a festive interior.

The first method of weaving Easter eggs from beads

This step-by-step pattern for weaving an Easter egg from beads for beginners is a classic way to create a beautiful product.

To make an egg, you should use the square bead stitch technique. This technique is very simple, but quite time consuming to implement, because the egg is completely covered with beads and the beads are braided one by one. But this technique allows you to get neat rows of beads that lie one above the other and you can make various patterns on the resulting canvas.

However, for the first time, you should do without patterns and simply braid the egg with colored rows of beads.

We need:

• size 11 beads, use the following colors: orange, yellow, green, purple and pink;
• wooden or plastic egg;
• nylon thread and beaded needle.

Weaving method:

1. As usual, you will need a very long thread for all beading, so it is recommended that you use a thread of a comfortable length (about 1 meter). Once it gets too short, you must secure it by zigzagging through a few beads and then cutting it off. Then take a new thread, weave it into the garment in the same way, and then continue to weave using this new segment of thread.
2. For convenience, we will divide the weaving process into three stages, thanks to which the step-by-step scheme for weaving Easter eggs from beads for beginners will become more understandable.

First step: make a ribbon with two rows of beads

String two orange and two yellow beads on a string. Place a set of balls about 10 cm from the free end of the thread. Number these beads from 1 to 4 in the order in which they were strung on the string

Pass the needle through beads 1 and 2, starting at the free end of the thread

Tighten the threads. Make sure the free end of the string remains at least 10 cm long. The yellow beads lay over the orange beads

String one orange and one yellow beads. Number them as beads 5 and 6

Pass the needle through the yellow # 3 bead

And then through the orange beads number 2 and 5

Tighten the threads. The last two beads lay next to the other beads in two rows: an orange bead in the bottom row and a yellow bead in the top row

In the same way, continue stringing the beads two at a time so that they form two rows of beads. Make sure after each step the thread comes out of the last orange bead you added

Therefore, make a tape that matches the length of the circle in the middle of the egg

Interesting! Beautiful window decorations for the New Year 2020

Next, connect the ends of the tape together. Pass the needle through the # 1 orange ball

Then pass the needle through the yellow # 4 bead

Then pass the needle through the outermost yellow bead on the opposite side of the ribbon

Finally, thread the needle through the two outermost orange beads on either side of the ribbon

Tighten the threads. We have a closed beaded tape

Since we are used to the fact that its first row consists of orange beads, pass the thread through the yellow bead to the top of the beads. Thus, the next row of balls will be positioned over the row of yellow balls

The first stage of weaving is complete

Stage two: braiding a wooden egg

• Further, a step-by-step diagram of weaving an Easter egg from beads for beginners shows that it is necessary to braid a wooden egg in this way.
• In the second step, you must make additional rows of balls with the same number of balls in each row. You should add as many rows of beads as needed to cover the middle of the egg. At this stage, beading can be done without an egg, you can only try a strip on the egg from time to time. Or, you can ball directly on the egg, if that's more convenient for you.
• Use the flat square stitch technique for this step. String the bead onto the thread.

Pass the needle in the opposite direction through the ball that lies just below in the previous row

Then pass the needle through the last bead added and tighten the thread. Thus, the last ball added lay over the corresponding ball in the bottom row

Thus, keep adding more balls one by one. First, pass the needle in the opposite direction through the ball that is in the previous row

• Then pass the needle through the bead you just added.
• So add beads to the end of the row.

• After that, it is advisable to run the needle over all the beads of the resulting row in order to squeeze them. Otherwise, weaving can be loose.
• Further, in the same way, other rows of beads are made that cover the middle part of the egg. The number of rows depends on the size of the egg and the size of the beads. The resulting strip should fit the middle of the egg and extend to the points where the egg begins to taper on either side.

Third stage: final (braiding the top of the egg)

In the last step, a step-by-step pattern for weaving an Easter egg for beginners is to cover the top of the egg. At this point, you should reduce the number of balls in each row. The beading technique is similar to the one we used in the previous step. Begin beading by adding beads one by one, each bead above one bead in the previous row. In the place where you need to reduce the bead, string one bead and pass the needle through the two beads of the previous row

After cutting the bead, continue to add several beads in the usual way (each bead is higher than one bead of the previous row) until the next point where you need to reduce the bead

• At this point, the beading should be done directly on the egg so that you can determine the number of beads to reduce. Each row should consist of such a number of beads that an egg can fit in it and there are no empty spaces between the beads in a row.
• As for me, in the 1st row at this stage I reduced 1 bead after 9 regular beads (i.e. I added 9 beads in the usual way and then added one bead above the two beads of the previous row). In the next rows, the reduction is faster.

• After completing each new row, pass the needle through all of its beads to squeeze them.
• The end of the top of the egg can be different. If the penultimate row is 5 or 6 balls, you can only place one ball in it. In my egg, the penultimate row consists of 9 beads, and I made the last row of 3 beads.

Thus, you must braid both tops of the egg. Such a step-by-step scheme for weaving an Easter egg from beads for beginners is quite complicated, but if you understand the principle, you can quickly master this technique.

The second method of weaving an Easter egg from beads

This pattern for weaving an Easter egg from beads for beginners is simpler than the previous one. Create two identical beaded flowers that are connected together around the circumference of the egg so that it is enclosed in a bead net.

Create a Base Ring. Row 7x red R7 on the line and tie three strong knots on the line. This creates the main ring. Pass the end of the line through the first R7 of that line again

Start stringing green beads into the design. Line 6X green R7 and thread a line through every odd red R7 in the base ring as illustrated. Then do the same again and add 4x R7. Row a total of 35x green R7. Pass the end of the line through the first R7 of that line again

Start stringing yellow beads into the design. Line 9X yellow R7 according to the illustration and thread the line through the green R7 from the previous line again. Row a total of 63x yellow R7. Pass the end of the line through the first R7 of that line again

Add red beads in the next row. Line 7x red R7 according to the illustration and thread the line through one yellow R7 from the previous line again. Row a total of 49x red R7. Pass the end of the line through the first R7 from the first line again

Row of green and yellow beads. Line 5x green R7, 1X yellow R7 and 5X green R7 as illustrated and thread the end of the line through Red R7 as illustrated. Repeat this procedure 6 times. Row a total of 70x green R7 and 7x yellow R7 in this row. Tighten all the thread appropriately and finish with two knots. Pass the end of the line through the nearest bead and cut it off

Interesting! We paint eggs for Easter with our own hands without dyes

Connect Flowers. Repeat the whole procedure from 1-5 once more. Line 5x green R7 and 4X yellow R7 according to illustration, thread end of line through yellow R7 from edge of first net section, 4X yellow R7, thread end of line through first yellow R7 from second weave according to illustration, tighten accordingly, line 5x green R7 and thread the end of the line through Red R7 from the first weave as illustrated. Gradually connect both flowers in this way. Place the egg on the Connected Grid and gradually cover the entire grid

You can decrease or increase the number of yellow beads that connect both parts of the Easter mesh, depending on the size of the egg.

Making a beaded Easter egg is not as easy as it seems at first glance. However, if you make a little effort and understand the principle of weaving, then even a beginner will succeed

Bonus

As a conclusion, we can say the following:

1. In order for a beginner to start weaving an Easter egg, you need to understand the principle of weaving.
2. The choice of materials is the first thing to start with.
3. You can choose any method of weaving, as it is more convenient for different people to start with different patterns.