How to make a rat out of nylon for the New Year 2020

2024 Author: James Gerald | [email protected]. Last modified: 2024-01-12 17:37

New Year is a holiday that everyone is looking forward to. It reminds of childhood and is associated with magic. In preparation for the celebration, they come up with not only dishes that will stand on the table, as well as an outfit in which you need to celebrate the holiday, but also gifts, as well as decorative elements.

As interesting products that can be presented to loved ones or to decorate the interior with them, you can use the symbol of the year, the rat made of nylon, which can be easily made according to a master class with step-by-step instructions.

Capron rat for beginners - master class

A nylon rat can be made very realistic, especially if you follow the advice of a master class with step-by-step instructions. If there is another dense material, for example, foamiran, it can be used to make a tail and ears.

Manufacturing process:

• Take a synthetic winterizer and fill it with a nylon bag, forming an oval shape.
• Wrap nylon around the filler in two layers. You should get a part in the size of two fists.

Approximately from the center of the oval-shaped workpiece, start sewing the product by threading the needle through

Pull up the thread and thread it through the entire workpiece again. Thus, stitch from the center to the edge (there will be a nose at the end)

• The nose also needs to be made from nylon. The part should be made round about 2.5 centimeters in diameter. The nose can be tinted a little.
• Then sew the nose to the main shape.
• Also, as in the formation of the nose, make tightening in those places where the ears will be attached.

Make several wrinkles on the nose with a thread, which must be inserted and removed from the side of the part. Wrap the thread over the top of the nose to the opposite side and pull it off a little. Thus, several assemblies should be made

• Then glue the eyes to the nylon.
• Paint the nose and wrinkles with paints or decorative cosmetics such as eye shadow.

Glue the ears and tail

Connect the torso to the head

• Glue my eyes.
• If you wish, you can give the rat a cute bang.

Rat from nylon - "Rat King"

This step-by-step instruction will allow you to make a real animal king, therefore, to make a rat from nylon in a master class, you will need to be patient and also enlist the support of adults.

Necessary materials:

• plastic bottle with a volume of 5 liters;
• nylon tights;
• synthetic winterizer or holofiber;
• foil;
• yellow crown rope;
• brightly colored fabric;
• satin ribbons in red and black (wide);
• bow;
• golden button;
• plaque from the belt;
• thread and needle.

Manufacturing process:

Stuff nylon tights with padding polyester, and then form faces for the beast ruler out of them

You need to start making a product from the nose. Sew the workpiece in the right places and pull off with threads. If the heads are different, you should not be upset - this is even more original. Each head will have its own character

Take two halves of nylon footprints and make ears for one head out of them. Then also fill with padding polyester

Do the same with all heads

After that, you need to shape the body. Wrap a five-liter bottle with padding polyester and put on tights

Sew all three heads to the formed form

Interesting! How to make Easter baskets from newspaper tubes

Make legs out of small pieces

Sew them to the product and then glue the decorative eyes. If there are none, then you can draw

Almost everything is ready, except for a bright outfit for the animal king

Take a bright fabric and sew a high collar out of it. The size must be selected based on the size of the toy. Decorate the collar edging with ribbons. Using the same materials, you need to make a robe for the rat

Next, you need to make a belt, for this use a wide black tape and a plastic plaque from the belt

Put it on the craft. Then sew the cuffs from the same tape

Take an unnecessary white bow, dissolve it and make a frill for the beast ruler

It will turn out as in the photo below

You can make a canvas from a red ribbon and a button and throw a rat over the shoulder

Next, you need to make a crown, the basis of which will be the wire. Wrap it with foil several times, and then decorate it with yellow rope

Put the crown on the craft

Next, you need to sew on a collar and put on a raincoat, and also do not forget about the tail. It can also be stuffed with padding polyester or sewn from a piece of fabric - whatever you like

The gorgeous king of mice and rats made of nylon is ready, you can admire it for a long time and be proud that it was made with your own hands according to a master class with step-by-step instructions.

DIY nylon mouse

On the eve of the New Year of the Rat 2020, many are already thinking about crafts, so this master class with step-by-step instructions on making a mouse from nylon will be useful.

You will need:

• superglue with a brush;
• scissors;
• nylon;
• a piece of tulle for a skirt (tulle can be used);
• doll eyes (diameter 1 cm);
• needle and thread.

Manufacturing process:

1. You need to make two blanks for the face and tummy with a diameter of 5 centimeters. There are also two blanks for ears with a diameter of 3 centimeters, for the legs there are four identical parts of 2 centimeters each. The blank for the spout should be made from dark-colored nylon.
2. Start sewing the feet. Front and back will be done the same. Secure the thread by the ponytail and sew about three grooves to make four fingers. It is recommended to use a needle-back stitch and tighten the thread more tightly.
3. After four fingers are ready, fasten the thread so that the part does not bloom. The surface of the foot must be sewn so as to narrow it slightly, as shown in the photo. The grooves on the foot can be painted over with dry cosmetics or paints. Make four legs in a similar way.
4. The tail can be made from a piece of elastic (about 8-9 cm), picking up, wrapping its edges and interlocking with a needle with a thread, as in the photo. The tail should be thin, and to be realistic, the thread should be tightened harder.
5. Next, you need to take a blank for the head, fasten it to the tail and form it in the form of an oval shape. Next, make two eye pins to mark their location. With the help of a thread, redo the workpiece to make a muzzle, and then fix it.
6. Sew the nose onto the muzzle into the hole provided for it.
7. Then you should make an eyelet from a workpiece with a diameter of 3 cm. Fasten a needle and thread and start stitching using the needle-back technique so that the eyelet takes shape and shrinks slightly. You can also paint over the grooves on the ears with dry makeup to highlight the contour.
8. Now is the time to attach the ears to the head in the right place.
9. Sew the head with ears to the tummy.
10. Next, attach the legs and tail.
11. You can put two bows on the ears to make the product look even more original.
12. From a piece of tulle, you need to make a skirt, like a ballerina. The fabric must first be stitched with a needle-forward stitch. Fasten under the ponytail, pull up and cut the thread.
13. Attach the eyes with superglue. Using dry makeup, paint on the cheeks and eyebrows.
14. It happens that some part is not completely sewn to the base and puffs up a little, as, for example, in this case it happened with the nose. This problem is easy to fix, just drip a little glue and press down on the element.

So a cute and interesting mouse is ready, which can be made without much difficulty, spending a minimum of materials.

Nylon mouse: step by step instructions

The product made of nylon turns out to be very soft and pleasant to the touch, therefore, when choosing a master class with step-by-step manufacturing of a rat, you can give preference to this instruction.

You need to prepare:

• nylon;
• synthetic winterizer;
• scissors;
• needle and thread;
• a piece of black cloth;
• wire;
• decorative eyes;
• eyelashes for toys;
• thermal gun.

Manufacturing process:

Make a detail that looks like a pocket from nylon. If a sock is used, then it can simply be filled with padding polyester. Cut a round piece out of black fabric, and sew along the edges with a regular seam. Pull off the thread. Put filler inside the black ball. You will get a blank for the head and nose of the mouse

Next, you need to mark the place where the nose is attached

• It is important to make the seams invisible.
• Pull the toe off at the top to form a round base.

Next, you need to grab the top and bottom, flattening the product. Pierce with a needle and thread

The needle should be pulled out near the nose

• Pull down again and out where the mouth of the product will be.
• It turns out as in the photo below.

Then you need to outline the location of the eyes

Retract the needle to the right, pierce and withdraw in the place where the eye will be. Then re-insert the needle in the same place where it came out. Display the product at the bottom, as in the photo. Do the same with the left side of the workpiece

Now you need to make a chin, for this, stick a needle and thread in the place where the mouth is located and bring it out through the wrinkle, as in the photo

• Pull out the needle in the place where the mouth is located so that it looks like in the photo.
• Take a needle and thread and pierce the workpiece from the back, and then bring it out near the eyes. Finish the eye with one stitch, and then sew the nylon from the back.
• Next, you need to make a seam on the sides of the head. Stick the needle in the direction where the ears will be, making a knot.
• You need to start making the ears. To do this, bend a dense wire around. Next, make two blanks. Pull the nylon over the wire. In the place where the ends of the wire are connected, you need to sew the nylon and pull it well.
• Sew on ears and nose.

Glue the plastic eyes and eyelashes with a gun. The result is a beautiful and cute mouse

Interesting! Beautiful window decorations for the New Year 2020

Bonus

Summarizing the above, several conclusions can be drawn:

1. Crafts from nylon look very original, and also pleasant to the touch. Even a small needlewoman can make such a product.
2. Nylon crafts are made from the simplest materials that you can easily find at home.
3. Rats for the New Year made of nylon will be an excellent gift for relatives, friends and relatives. Especially if it is made with your own hands and donated from a pure heart.